GB/T 11261-2006 钢铁 氧含量的测定 脉冲加热惰气熔融-红外线吸收法
作者:标准资料网 时间:2024-05-03 15:08:36 浏览:8130
来源:标准资料网
基本信息
标准名称: | 钢铁 氧含量的测定 脉冲加热惰气熔融-红外线吸收法 |
英文名称: | Steel and iron Determination of oxygen content The pulse heating inert gas fusion-infra-red absorption method |
中标分类: |
冶金 >>
金属化学分析方法 >>
钢铁与铁合金分析方法 |
ICS分类: |
冶金 >>
黑色金属 >>
黑色金属综合
|
替代情况: | 替代GB/T 11261-1989 |
发布部门: | 中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会 |
发布日期: | 2006-03-02 |
实施日期: | 2006-09-01 |
首发日期: | 1989-03-31 |
作废日期: | 1900-01-01 |
主管部门: | 中国钢铁工业协会 |
提出单位: | 中国钢铁工业协会 |
归口单位: | 全国钢标准化技术委员会 |
起草单位: | 宝钢集团上海五钢有限公司、国家钢铁材料测试中心、武汉钢铁公司、宝钢集团上海钢铁研究所、宝钢集团上海一钢有限公司、山东省冶金科学研究院、上海材料研究所等 |
起草人: | 王玉娟、崔秋红、樊勇飞、俞信霞 |
出版社: | 中国标准出版社 |
出版日期: | 2006-09-01 |
页数: | 8页 |
计划单号: | 20021410-T-605 |
适用范围
本标准规定了用脉冲加热惰气熔融-红外线吸收法测定钢铁中氧含量的方法,适用于质量分数0.0005%~0.020%的测定。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 冶金 金属化学分析方法 钢铁与铁合金分析方法 冶金 黑色金属 黑色金属综合
【英文标准名称】:Fire-fightingpumps-Fire-fightingcentrifugalpumpswithoutprimer-Part1:Classification,generalandsafetyrequirements(includesAmendmentA2:2008);EnglishversionofDINEN14710-1:2009-06
【原文标准名称】:消防泵无起动注油器的消防离心泵第1部分:分类、总则和安全要求
【标准号】:DINEN14710-1-2009
【标准状态】:现行
【国别】:德国
【发布日期】:2009-06
【实施或试行日期】:2009-06-01
【发布单位】:德国标准化学会(DE-DIN)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:附件;离心泵;分类;一致性测试;定义;检验(质量保证);消防队;消防队用设备;防火离心泵;消防器械;消防泵;防火安全;消防;消防设备;灭火泵;危害;高压泵;检验;作标记;材料;测量;测量技术;机械工程;机动泵;压力测量(流体);压力试验;保护措施;泵;合格试验;规格试验;安全;安全装置;安全要求;规范(验收);潜水泵;测试;用户信息;水污染
【英文主题词】:Accessories;Centrifugalpumps;Classification;Conformitytesting;Definitions;Examination(qualityassurance);Firebrigade;Firebrigadedevices;Firecentrifugalpump;Fireextinguishingdevices;Firepumps;Firesafety;Firefighting;Firefightingequipment;Fire-fightingpumps;Hazards;High-pressurepumps;Inspection;Marking;Materials;Measurement;Measuringtechniques;Mechanicalengineering;Motorpumps;Pressuremeasurement(fluids);Pressuretests;Protectivemeasures;Pumps;Qualificationtests;Ratingtests;Safety;Safetydevices;Safetyrequirements;Specification(approval);Submersiblepumps;Testing;Userinformation;Waterpollution
【摘要】:Thisdocumentappliestocentrifugalpumpswithoutprimingdevicesforfire-fightingusedesignedas--floatingpumps(FPN-F),--submersiblepumps(FPN-S)or--boostedpumps(FPN-B).Fire-fightingcentrifugalpumpswithoutprimeraredefinedasterminatedbytheirinletandoutletconnectionsaswellasbytheirshaftends.Thisdocumentappliesforfire-fightingcentrifugalpumpswithoutprimingdevicesforuseunderambienttemperaturesbetween-15℃and40℃.NOTE1Forspecialconditions,-30℃;see6.11.Thisdocumentdoesnotapplytofire-fightingcentrifugalpumpswithoutprimerofwhichtheonlypowersourceisdirectlyappliedmanualeffort.Thisdocumentdoesnotapplytofire-fightingcentrifugalpumpswithoutprimer,intendedtobeusedasinterchangeableequipment(i.e.combinedbytheuserwithanothermachineorvehicleactingasadriver).Thisdocumentdoesnotapplytofire-fightingcentrifugalpumpswithoutprimerwithanominaldeliverypressurePNabove15bar.NOTE2HighpressurepumpswithprimeraredealtwithinEN1028-1andEN1028-2.Thisdocumentspecifiestheclassificationandgeneralrequirementsforfire-fightingcentrifugalpumpswithoutprimingdeviceswithanominaldeliveryrateofupto10000I/min.ThisdocumentdealswithsignificanthazardslistedinClause4,hazardoussituationsandeventsduringthecommissioning,operationandmaintenanceoffire-fightingcentrifugalpumpswithoutprimingdevices,usedasintendedandundertheconditionsforeseenbythemanufacturer.Thisdocumentdoesnotdealwiththedetailedverificationofgeneralandsafetyrequirementsand/orprotectivemeasures.ThesearecoveredinEN14710-2"Verificationofgeneralandsafetyrequirements".Thisdocumentdoesnotdealwithnoise.Thisdocumentdoesnotdealwiththetechnicalsafetyrequirementsforthedesignormanufactureofdriversorofadditionalequipmentintendedtobefittedtoinletandoutletconnections.Itdoesnotcoverrisksdirectlyarisingfrommeansprovidedfortheportability,transportability,andmobilityofpumpunitsduringorbetweenperiodsofoperation,orrequirementsforpowertransmissiondevices.Inaddition,thisdocumentdoesnotcover:--hazardsoccurringduetodecommissioning;--hazardsduringuseduetoaspecificenvironment(e.g.trafficduringuseonpublicroads,potentiallyexplosiveatmospheres).Thisdocumentdoesnotapplytofire-fightingcentrifugalpumpswithoutprimerthataremanufacturedbeforethedateofpublicationbyCENofthisdocument.
【中国标准分类号】:C84
【国际标准分类号】:13_220_10;23_080
【页数】:35P.;A4
【正文语种】:英语
【英文标准名称】:Servicesofvacationalrehabilitationcentres-Part2:vocationalassessment(preorientation)centres.
【原文标准名称】:职业康复中心服务.第2部分:职业评估(预取向)中心(预取向)centres.
【标准号】:NFX50-780-2-2010
【标准状态】:现行
【国别】:法国
【发布日期】:2010-09-01
【实施或试行日期】:2010-09-25
【发布单位】:法国标准化协会(FR-AFNOR)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:
【英文主题词】:
【摘要】:
【中国标准分类号】:C47
【国际标准分类号】:03_080_99;03_100_30;11_180_99
【页数】:19P;A4
【正文语种】:其他